Heavy Duty Transmission Fluid Transfer Pump Kit Featuring Extended Clear Hose And Swivel Tip For Hassle Free Differential Gear Oil Change On Hot Rods Trucks And Marine Rigs Zero Sweat Design White

Heavy Duty Transmission Fluid Transfer Pump Kit
✔️ Complete single kit with extension hose and brass couplings.

This transmission fluid transfer pump acts as a dedicated gear oil extractor for hot rod diffs, truck rear axles, and marine lower units. The zero sweat design channels thick lubricants straight into standard quart jugs without drips or messy spills.

✅ Pump barrel spans 7.12 inches (181 mm) with a 0.33 inch (8.4 mm) flow bore
✅ Clear extension tube reaches 19.68 inches (500 mm) offering a 0.35 inch (8.9 mm) inner channel
✅ Dual suction legs measure 5.13 inches (130 mm) plus 5.92 inches (150 mm)
✅ Mounting hardware features a 3/8 inch (9.5 mm) ball joint alongside 8mm and 10mm thread tops
✅ Hand squeeze action moves roughly 8cc of fluid per stroke while fitting 946 milliliter containers

💡 What makes a fluid transfer pump handy for shifting gear oil and differential fluid?
- Pulls viscous automotive oils straight out of sealed transmission housings through narrow filler ports.
- Builds steady low pressure when you compress the manual rubber bulb for reliable suction control.
- Ball joint adapters swivel freely to route clear tubing around frame members without kinking.
- Transparent plastic walls let you watch the fluid climb so you top off the gearbox right on schedule.