Heavy Duty Rc Motor Pinion Gear Puller And Remover Kit For Small Truggy Models And Helicopters Featuring Thickened Upper Pins To Save Money And Keep Your Hobby Rigs Rolling Smooth

Heavy Duty Rc Pinion Gear Removal Tool Kit
✔️ High carbon steel, covers pins 0.9mm to 3.9mm, pulls tight bearings clean

You will use this gear puller set to safely extract worn pinions from hobby motors before splurging on new drives. It works perfectly on rc trucks and helicopters where tight components get glued or pressed down. The package arrives with one complete assembly prepped for your workbench.

✅ Hard chrome coated steel frame stands up to repeated pulling force
✅ Needle options span 0.9mm (0.035in) through 3.9mm (0.154in) for varied axle widths
✅ Clears stubborn assemblies up to 11mm (0.43in) wide and 12mm (0.47in) tall in minutes
✅ Packs down to 8x6x3cm (3.15x2.36x1.18in) and weighs 122g (4.3oz) for easy bench storage
✅ Works inside truggy chassis and helicopter rotor boxes to swap worn parts fast

💡 How can hobbyists use a handy gear puller to clear stuck motor pinions without ruining the drive train?

- Warm any cured epoxy carefully so the tool grips firmly without stripping the shaft threads.

- Select the exact needle size to keep pressure centered and prevent bent axles during heavy pulls.

- Spin the handle clockwise at a smooth pace until the bearing pops free from the casing.

✝️