Heavy Duty M6 Hollow Wall Anchors For Thin Walls 1 Inch Long Galvanized Carbon Steel Drive Anchors Included Set Of 20 Pieces For Doors And RV Walls Beast Grade Strength Bulletproof Performance
✔️ Pack of 20 galvanized pins fits 6mm (0.24in) dia and 25mm (1in) length
You get twenty heavy duty anchor kits designed for fastening items to hollow panels without cracking the surface. These flat head driving screws expand behind thin panels to lock heavy shelves, cabinet tracks, and electrical raceways in place. You will tap each pin into a pre drilled hole and crank the thread until the collar locks tight against the backing board. Each unit measures 6mm (0.24in) diameter and 25mm (1in) length for precise fitting.
✅ Twenty pieces per box give you plenty of extras for quick RV or studio setup repairs✅ Heat treated carbon steel core handles heavy loads without stripping the threads
✅ Zinc plating blocks moisture corrosion so the hardware survives humid workshop seasons
✅ Quick turn installation works directly with needle nose pliers when setting tools are away
💡 How do steel drive pins perform under heavy static loads compared to nylon plugs?
This method proves handy for securing heavy shelving and bracket tracks on thin partition boards.
- Knurled grooves bite hard into softwood studs and gypsum cores to eliminate spinning during tightening
- Flat collar profiles sit flush against thin siding panels without creating unsightly raised bumps
✝️