Heavy Duty Electric Rebar Bender Up To 1 Inch. Blast Through 1600W Power With Foot Pedal Control For Instant Results. Bend Steel Rods Smoothly And Fast Without The Sweat. Perfect Tool For Pros On Any Job Site Today

Commercial Single 1 Inch Electric Hydraulic Rebar Bender
✔️ 1600W copper motor, 0 to 180 angle bends, foot pedal, single unit

Designed for hands-on contractors who need to knock out complex frameworks quickly, this hydraulic bender tackles rods up to 1.0 inch / 25 mm without breaking a sweat. The 1600W copper motor paired with a direct hydraulic pump handles tough carbon steel and rebar layouts efficiently while keeping volume levels tolerable for daytime shifts.

✅ Cuts 6 to 25 mm / 0.25 to 1.0 inch steel rod in 6 to 7 seconds flat
✅ Draws 110V / 14A current and stays quiet at 92 dB / 92 decibels under load
✅ Slides lock angles from 0 / 0 inch to 180 / 180 inch without drift or slip
✅ Iron chassis holds a 78 mm / 3.0 inch rolling wheel and 94 mm / 3.7 inch fixed anchor plate
✅ Carries four grip spots and accepts a standard ground outlet for instant job site hook up

💡 What maintenance routine prevents early failure when running a hydraulic rebar bending rig on daily job sites? Cleaning the tracks and keeping the fluid topped off keeps the machine running smooth so you never lose steam halfway through a pour. - Wipe the guide rail every second shift to scrap off rust and keep your bend radius spot on - Check the hydraulic tank monthly and fill it with iso forty oil for steady pressure under load - Let the copper motor run idle for thirty seconds before dropping in thick steel to get everything warmed up - Relax the clamp bolts when you wrap up for the day to save the drive springs from sagging overnight

✝️