Heavy Duty 38L Commercial Ultrasonic Cleaner That Really Crushes Stubborn Grime On Industrial Parts Jewelry Watches And Lab Gear While Delivering Beast Mode 360 Degree Deep Wash Performance Pro
Commercial 38-Liter Ultrasonic Cleaner For Heavy Parts
✔️ 38L Stainless Steel Tank Digital Timer & Temp Control
This single heavy duty commercial unit uses 120 kHz cavitation waves to rip grease, rust, and stubborn grime off industrial hardware, auto components, lab gear, and precision watch parts. Built with 2.0mm thick 304 stainless and seamless argon arc welds, it handles rigorous shop work or benchtop maintenance without needing external control boxes or messy wire routing.
| Inner Cleaning Space | 500 x 300 x 250 Mm |
| Total Capacity | 38 Liters |
| Ultrasonic Output | 720 Watts At 120 Khz |
| Heating Element | 1000 Watts Up To 80C |
| Voltage Plug | Ac 110V 60Hz |
✅ Steps timer from 1 to 30 minutes with precise digital countdown memory
✅ Runs mechanical dial to trim wash power from zero to full intensity
✅ Drains dirty fluid straight out bottom and packs with storage rack
💡 What drives reliable industrial ultrasonic cleaning technology?
Cavitation forces microscopic vapor bubbles to implode against surfaces, handing you a handy method to strip baked-on oil and dust without scrubbing fragile parts apart.
The high frequency oscillation penetrates blind bores and threaded holes where brushes cannot reach, keeping machined tolerances tight.
Dual sealed heating tubes maintain constant thermal energy so solvents activate faster and rinse off cleanly every cycle.
Integrated control panels cut down floor space while heavy duty shock mounts stop tank warping during continuous shop shifts.
✝️