Pillow Block Bearing 1-1/4 Inch Bore, Pressed Steel Housing, Self Aligning Ball Bearing, Set Screw Locking, Light Duty Unit for Industrial Machinery, Conveyors, Agricultural Equipment, and Retrofits
✔️ Sealed ball bearing, pressed steel pillow block, 1-1/4 bore
This pillow block bearing is a light-duty, self-aligning unit used to support rotating shafts in machinery, conveyors, and automation setups. It features a pressed steel housing with an inter-locking IL option and reliable seals for clean operation in general purpose equipment.
Paragraph✅ Bore: 1-1/4 in (31.75 mm) with 3/8 in bolt
✅ Housing: pressed steel pillow block with IL inter-locking option
✅ Seal: RST tight riding, full cover, metal shroud
✅ Shaft diameter: 1-1/4 in (31.75 mm)
✅ Housing no: PP-6Z-SETS-IL, Quantity: 1
✅ Bearing no: FH206-20
✅ Type: light-duty, self-aligning bearing
| h | a | e | b | s1 | s2 | g | w | L | n | m | i | W |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1-5/16 in / 33.35 mm | 4-7/8 in / 123.83 mm | 3-3/4 in / 95.25 mm | 1-1/4 in / 31.75 mm | 13/32 in / 10.32 mm | 9/16 in / 14.29 mm | 15/64 in / 5.95 mm | 2-5/8 in / 66.68 mm | 1-13/32 in / 35.71 mm | 11/32 in / 8.73 mm | 37/64 in / 14.69 mm | 15/32 in / 11.91 mm | 1-3/4 in / 44.45 mm |
💡 What is a pillow block bearing used for in industrial settings? This handy piece helps keep shafts aligned and supported in a wide range of machinery and light-duty automation. - Supports rotating shafts in conveyors, mills, and automation lines - Handy for quick mounting with standard pillow block fixtures - Keeps shafts aligned under light loads with a pressed steel housing - Seals protect against contaminants and help retain lubrication