Pillow Block Bearing With 20mm Inner Diameter And 20mm Shaft Height Eccentric Locking Collar Solid Foot Housing Design Narrow Bore Ball Bearing For Precise Linear And Rotary Motion
✔️ 20 mm bore, 20 mm shaft height, 3/4 in bolt, FH204-20mm
This pillow block bearing is a standard 20 mm bore unit designed to support rotating shafts in compact machinery. It’s commonly used in conveyors, automation systems, and light-duty manufacturing equipment where reliable radial support is needed.
✅ Bore diameter 20 mm (0.79 in) and 20 mm shaft height
✅ Eccentric locking collar for easy pre-load and alignment
✅ Solid foot housing with RST tight riding seal and metal shroud
✅ Bolt size 3/4 in; housing P-204-HA, bearing FH204-20mm
✅ Non-relubricatable sealed bearing with narrow inner ring design
| Dimension | mm | in |
|---|---|---|
| h | 33.34 | 1.31 |
| a | 127 | 5.00 |
| e | 95.3 | 3.75 |
| b | 34 | 1.34 |
| s1 | 12.7 | 0.50 |
| s2 | 19.1 | 0.75 |
| g | 13.5 | 0.53 |
| w | 64.3 | 2.53 |
| L | 31 | 1.22 |
| n | 7.5 | 0.30 |
| m | 13.91 | 0.55 |
| W | 32 | 1.26 |
💡 What is a pillow block bearing used for in mechanical systems? Pillow block bearings are handy for mounting shafts and supporting radial loads in conveyors, automation, and machinery. - Supports shaft alignment and radial load handling - Seals keep contaminants out and grease in - Fits standard 20 mm bore pillow block units - Easy mounting with eccentric locking collars
| This item will be shipped within One Week Returns Subject to 15% restocking Fee |
|
FHP204-20mm Pillow Block Standard Shaft Height Ball Bearing Eccentric Locking Collar 20mm Inner Diameter |
|
||||||||||||||||||||||||||||||||||||||