Beefed Up Panhard Bar Kit With Bung For One And A Half Inch Tube Fits One And A Half Inch Outer Diameter And One Inch Inner Diameter And Quarter Inch Wall Includes Right And Left Rod Ends 1045 Steel Body With 52100 Bearing Steel Ball Three Quarter Inch
✔️ 1 right and 1 left rod end,.625 bore, 3/4-16 threads
Designed for 1.5 in outer diameter tubes with 1.0 in inner diameter and 0.25 in wall, this kit uses C1045 steel for the body and a precision-ground 52100 bearing steel ball. The bung is 1045 mild steel with 3/4-16 threads, and the jam nut is also 3/4-16 for secure mounting. It ships as a complete unit with both ends included, ready for installation in off-road or performance suspension applications.
✅ Body: C1045 steel, heat treated; ball: 52100 bearing steel, precision ground; bore:.625; ball width:.750; thread: 3/4-16; load rating: 19,350
✅ Bung: 1045 mild steel; thread: 3/4-16; fits tube size: 1.500 in OD x 1.000 in ID x.250 in wall
✅ Jam Nut: Thread: 3/4-16; width: 1-1/8 in; height: 0.425 in
✅ Rod Ends: Right hand & Left hand, with 3/4-16 threads, includes heim joints
💡 What is a Panhard bar kit with bung and rod ends used for in a suspension system for 1.5 inch tubes?
This handy component keeps the axle aligned and reduces sideways movement under load.
- panhard bar kit for 1.5 in tube OD - includes 1 right hand and 1 left hand rod end with 3/4-16 threads - built from 1045 steel with a 52100 bearing steel ball for durability - designed to mount with a bung and jam nut for secure installation✝️