Beefed Up Heavy Duty Hydraulic Linear Actuator 8 Inch Stroke Generates A No Nonsense 1700 Lbs Of Pure Straight Line Thrust With Solid 12 Volt Dc Juice From Your Battery Box

Solid 12V Hydraulic Actuator Drives Heavy Machinery Tasks
✔️ 200mm (8 inch) stroke pushes 1700 lbs linear force smoothly

This single pack unit converts battery power into smooth linear motion for tough jobs. You will mount it on dump trailers, lift tables, solar trackers, and wheelchair ramps where steady pushing matters. The sealed cylinder blocks out dirt while cycling extension and retraction under demanding shop or yard conditions.

✅ Generates 1700 pounds of straight line thrust for serious lifting jobs
✅ Runs on standard 12 volt direct current from battery boxes or chargers
✅ Features a 200 mm (8 inch) working stroke for precise travel range
✅ Moves unloaded at roughly 13 mm (0.5 inch) per second for controlled timing
✅ Built with a 35 mm (1.38 inch) cylinder bore and 22 mm (0.87 inch) rod housing

💡 How does a sealed 12 volt hydraulic linear actuator manage peak compressive stress safely?
These units get pretty handy when swapping old mechanical lifts for smoother straight line motion.
* Internal relief valves vent extra pressure when resistance spikes past optimal working ranges
* Ground shaft sleeves cut down sliding friction and protect bearing races from abrasive dust
* Reinforced tie rods hold cylinder halves tight while resisting massive bending moments under weight