7013CYDUP4 Nachi Angular Contact Bearing 65x100x18 Abec-7 Bearings

The raceways of both the inner and outer rings of this bearing type are made out of a contact angle that was established. These bearings are non-separable. Considering that the balls are added utilizing structure, a number of balls can be set up than in the instance of Deep-groove ball bearings. Standard cage materials may be scraped on high-strength metal steel, or resin. Cage material depends upon the bearing series and or service requirement. Single-row Angular Contact ball bearings can sustain heaps any load has to be in 1 direction. This bearing type is generally utilized to deal with the load caused by the internal axial force generated by the radial load that was applied. When mounting two single bearings in adjacent places, NACHI supplies these mix parts (pairs) with pre-adjusted clearance. Mix bearings are matched sets. Combination or paired bearings can be ordered BACK-TO-BACK (DB), FACE-TO-FACE (DF), or even in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

💡 What Does ABEC-7 Mean?

ABEC-7 is a high-precision rating from the Annular Bearing Engineers’ Committee (ABEC), indicating extremely tight manufacturing tolerances. These bearings provide ultra-smooth, low-friction performance and are often used in high-speed, high-accuracy applications.

ABEC-7 bearings are commonly found in precision instruments, aerospace equipment, high-end electric motors, and demanding industrial machinery. They offer exceptional performance but are typically more expensive due to the level of accuracy involved.