7012CYDUP4 Nachi Angular Contact Bearing 60x95x18 Abec-7 Bearings
Type: Nachi Angular Ball Bearings
Cage: Polyamide resin cage
Quality: ABEC-7 (P4 quality)
Dimensions: 60mm x 95mm x 18mm/Metric
|High Precision Ball Bearings|
7012CYDUP4 Nachi Angular Ball Bearings
15 degrees Contact Angle
60mm x 95mm x 18mm
Made in Japan
7012CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.
The raceways of both the outer and inner rings of this bearing kind are made out of a contact angle that was established. A number of balls could be set up than in the instance of ball bearings, Considering that the balls are added using structure. Standard cage substances might be scraped high-strength metal steel, or resin. Cage substance depends upon the bearing service or series and requirement. Single-row Angular Contact ball bearings can sustain heaps any load has to be in 1 direction. This bearing type is utilized to deal with the load caused by the axial force created by the load that was applied. When mounting two bearings in adjacent places, NACHI supplies these mix components (pairs) with pre-adjusted clearance. Mix bearings are places. Axial loads can be sustained by DF or DB sets.