Nachi

7005CYDUP4 Nachi Angular Contact Bearing 25x47x12 Abec-7 Bearings

$396.99
SKU: Kit10872
UPC: 00193019091708
Item: 7005CYDUP4 Nachi Ball Bearings
Type: Nachi Angular Ball Bearings
Cage: Polyamide resin cage
Quality: ABEC-7 (P4 quality)
Dimensions: 25mm x 47mm x 12mm/Metric
High Precision Ball Bearings
7005CYDUP4 Nachi Angular Ball Bearings
15 degrees Contact Angle
Abec-7
25mm x 47mm x 12mm
Made in Japan


7005CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.

  • Item: 7005CYDUP4 Nachi Ball Bearings
  • Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 25mm x 47mm x 12mm/Metric
  • ID (inner diameter)/Bore: 25mm
  • OD (outer diameter): 47mm
  • Width/Height/thickness: 12mm
  • Size: 25 x 47 x 12 mm
  • Quantity: Pair of Bearings
  • Dynamic load rating Cr: 21,000 N
  • Static load rating Cor: 17,300 N
  • Limiting Speed:
    • Grease Lubrication: 18,000 RPM
    • Oil Lubrication: 25,000 RPM
  • Made in Japan


Dimensions
d D B r r1 a
25mm 47mm 12mm 0.6mm 0.3mm -1.8mm

The raceways of both the inner and outer rings of this posture type are made with a contact angle that was established. These claws are non-separable. A number of balls could be installed than in the instance of ball bearings Because the balls are added utilizing construction. Standard cage materials might be made high-strength metal steel , or resin. Cage substance is dependent upon the bearing series and or support requirement. Single-row Angular Contact ball bearings can sustain loads, however, any load must be in 1 direction. This posture type is utilised to handle the load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these mix parts (pairs) together with pre-adjusted clearance. Combination bearings are sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TO-FACE (DF), or even at TANDEM (DT). DB or DF sets could maintain loads that are bidirectional.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
a
am
great buy

installation