High Precision Ball Bearings 7002CYDUP4 Nachi Angular Ball Bearings 15 degrees Contact Angle Abec-7 15mm x 32mm x 9mm Made in Japan
7002CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.
Item: 7002CYDUP4 Nachi Ball Bearings
Type: Nachi Angular Ball Bearings
Cage: Polyamide resin cage
Quality: ABEC-7 (P4 quality)
Dimensions: 15mm x 32mm x 9mm/Metric
ID (inner diameter)/Bore: 15mm
OD (outer diameter): 32mm
Size: 15 x 32 x 9 mm
Quantity: Pair of Bearings
Made in Japan
The raceways of both the outer and inner rings of this set up kind are made out of a contact angle that was established. These claws are non-separable. A quantity of balls could be set up than in the event of ball bearings Because the balls are added using structure. Standard cage substances could be brushed high-strength metal, steel artificial or resin. Cage substance depends upon the bearing support or series and requirement. Single-row Angular Contact ball bearings can sustain loads any load has to be in 1 direction. This posture type is utilized to deal with the load caused by the axial force created by the load that was applied. When mounting two bearings in adjacent places, NACHI supplies these mix components (pairs) together using pre-adjusted clearance. Mix bearings are places. Axial loads can be sustained by DB or DF sets.