7000CYDUP4 Nachi Angular Contact Bearing 10x26x8 Abec-7 Japan Bearings
Type: Nachi Angular Ball Bearing
Cage: Polyamide resin cage
Quality: ABEC-7 (P4 quality)
Dimensions: 10mm x 26mm x 8mm/Metric
|7000CYDUP4 Nachi Angular Contact Abec-7 Ball Bearing|
10mm x 26mm x 8mm
Made in Japan
7000CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.
The raceways of both the outer and inner rings of this posture type are made with a contact angle that was established. These claws are non-separable. A quantity of balls may be installed than in the event of Deep-groove ball bearings, Considering that the balls are inserted using counter-bore construction. Standard cage materials might be brushed steelbrass artificial or resin. Cage substance is dependent upon the bearing support or series and requirement. Single-row Angular Contact ball bearings can sustain loads any axial load must be in 1 direction. This posture type is utilized in pairs to handle the load resulting from the internal axial force generated by the applied first load. When mounting two bearings in adjacent places, NACHI provides these combination parts (pairs) together with pre-adjusted clearance. Paired mix bearings are places. Bidirectional axial loads can be sustained by DF or DB sets.