Nachi
6211NRBNLM Nachi Bearing 55x100x21 Open C3 Snap Ring Bearings
UPC: 00193019099483
Type: Nachi Deep groove Ball Bearing
Radial Clearance: C3
Dimensions: 55mm x 100mm x 21mm/Metric
ID (inner diameter)/Bore: 55mm
6211NRBNLM Nachi With Snap Ring (C clip) Ball Bearing 55mm x 100mm x 21mm Made in Japan |
6211NRBNLM Nachi Bearing, 6211NRBNLM is Non grease, Made in Japan, with a Snap Ring, the 6211NRBNLM inner diameter is 55mm, the 6211NRBNLM outer diameter is 100mm, 6211NRBNLM width is 21mm.
|
Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.