Nachi
6005 Nachi Bearing Open C3 Japan 25x47x12
UPC: 00193019104316
Type: Nachi Deep groove Ball Bearing
Radial Clearance: C3
Dimensions: 25mm x 47mm x 12mm/Metric
ID (inner diameter)/Bore: 25mm
6005 Nachi Bearing 25mm x 47mm x 12mm Made in Japan |
6005 Nachi Bearing, Made in Japan, the 6005 inner diameter is 25mm, the 6005 outer diameter is 47mm and the 6005 width is 12mm.
|
Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.