Nachi

6003C3BNLM Nachi Bearing Open C3 Japan 17x35x10

No reviews
$23.99
SKU: Kit14612
UPC: 00193019100400
Item: 6003C3BNLM Nachi Ball Bearing
Type: Nachi Deep groove Ball Bearing
Radial Clearance: C3
Dimensions: 17mm x 35mm x 10mm/Metric
ID (inner diameter)/Bore: 17mm
6003C3BNLM Nachi Bearing
17mm x 35mm x 10mm
Made in Japan


6003C3BNLM Nachi Bearing, Made in Japan, here are the dimensions of the 6003C3BNLM, the 6003C3BNLM inner diameter is 17mm, the 6003C3BNLM outer diameter is 35mm and the 6003C3BNLM width is 10mm.

  • Item: 6003C3BNLM Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 17mm x 35mm x 10mm/Metric
  • ID (inner diameter)/Bore: 17mm
  • OD (outer diameter): 35mm
  • Width/Height/thickness: 10mm
  • Size: 17 x 35 x 10 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 6,000 N
  • Static load rating Cor: 3,250 N
  • Limiting Speed:
    • Grease Lubrication: 22,000 RPM
    • Oil Lubrication: 26,000 RPM
  • Made in Japan

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.