Top Shelf Sintered Bronze Flanged Sleeve Bearings 1 Inch Bore X 1.25 Outer X 1.5 Long With Flared Lip Self Lubricating Maintenance Free Bushings Built Like A Tank For Daily Shop Repairs

Self lube bronze flanged bearings for reliable shop work
✔️ ID 1.0 in bore 1.25 in outer 1.5 long self lube bronze bushing

This single maintenance free bronze bushing houses a solid copper alloy sleeve built to handle moderate rotation and steady radial loading. You typically mount these units on conveyor rollers, workshop jigs, and light equipment frames where removing grease fittings cuts down routine servicing time.

✅ Inside diameter measures exactly 1.0020 inches for a true slip fit
✅ Outside diameter sits at 1.252 inches alongside a full 1.5 inch body span
✅ Outer flange stretches to 1.625 inches wide with a flat 0.125 inch face width
✅ SAE 841 sintered copper matrix locks in porous iron oil for constant dry running
✅ Sustains static loads up to 8,000 psi while handling dynamic shear at 1,200 surface feet per minute

💡 How do you stop early wear on generic sintered bronze pillow block units running heavy side loads?
Most shops ruin these assemblies by rushing the install or neglecting basic clearance checks.
- Rough up the shaft surface slightly so the soft copper lining bites and seals faster
- Slather a dab of wheel bearing grease around the rim then wipe drips so the pores stay fed
- Watch mounting bolts since vibration will shake loose cheap thread locker in record time
- Toss damaged rings the second you see deep scratches because swapping parts beats welding shafts