Quiet Solder Fume Extractor For Small Benchtops With 3 Stage Filtration And 99.97 Percent Purification, Captures 0.3 Micron Particles, Low Noise Design For DIY Or Pro Soldering In Your Shop
✔️ 3-stage filtration with activated carbon for 99.97% purification
Designed for compact soldering on small benches, the FC100A fume extractor pulls fumes, dust and smoke away from the work area. With a maximum no-load power of 100W, this 1-unit setup is ideal for DIY or professional use in tight shops. The unit uses a 3-layer filtration system, including 10 pre-filters and a high iodine activated carbon main filter, delivering strong purification and extended service life. It can capture particles as small as 0.3 microns at up to 200 m³/h of airflow, helping remove exhaust gas, powder and iron filings near the hood. The upgraded carbon filter combines two into one for better sealing and longer life, and the system is CE and FCC certified. Note: not suitable for large laser engravers; consider FC-2002, FC-2003, or FC-2004 models for bigger needs. Color: Gray.
✅ 99.97% purification rate for 0.3 micron particles
✅ 3-layer filtration with 10 pre-filters and upgraded Hepa carbon main filter
✅ 100W max power and up to 200 m³/h suction
✅ Carbon filter life up to 3000 hours and stronger sealing
✅ CE and FCC certified; 24/7 support and easy returns
💡 What is a compact solder fume extractor used for in small bench setups?
A handy device to pull fumes away from the work area, improving air quality during soldering tasks.
- solder fumes removal for small benchtop setups- captures 0.3 micron particles with 99.97% efficiency
- compact, low-noise design for DIY or pro shops✝️