Pro Grade Rock Solid Roller Chain Sprocket With Type B Hub, Single Strand 08B Chain Setup, 114 Teeth, 25 Millimeter Bore, Fully Reboreable Precision Drive Gear Assembly

Single Unit Type B Roller Chain Sprocket 114 Tooth 25mm Bore
✔️ Fits 08B 12.70mm 0.500inch pitch chains 25mm shaft size reliable

This roller drive wheel meshes straight with single strand 08B conveyor belts to move parts along flat frames. Installers mount these onto parallel equipment shafts to lock down rotational momentum without slipping. The reboreable core is pretty handy when you need quick axle swaps on retrofitted rigs. Workers favor them because the thick alloy handles shock loads and keeps timing tight through daily shifts.

✅ Tracks on 08B 12.70mm 0.500inch pitch chain rails
✅ Accepts keyed shafts from 10mm 0.394inch up to 25mm 0.984inch
✅ Keeps 114 contact slots for even torque distribution
✅ Houses rollers measuring 8.51mm 0.335inch wide and 7.75mm 0.305inch thick
✅ Weighs around 11kg 24lbs to absorb heavy vibration loads

💡 How do you prevent premature wear on a multiple tooth type B drive sprocket during heavy operation?

This setup grabs torque clean when you dial the preload just right.

- Lock the hub flange flush against the shoulder so power transfer stays solid

- Check tension monthly since cold weather shrinks the links and changes slack

- Align the pilot diameter with a dial indicator to quit side thrust damage

- Pack the bearings before run in to keep road grout out of the rolling elements

✝️