Heavy Duty Electric Pipe Threader 220V Threading Cutter For 1/2 To 2 Inch Steel Pipes Built Tough With Automatic Oiling System And Precision Alloy Steel Dies For Tradespeople Demanding Dead Simple Operation

Electric Pipe Threader 220V Heavy Duty Cutter For Piping Tasks
✔️ 1/2-2 Inch Pipe Threader 750W AutoOil 1PerPack 635x400x440MM 65mmChuck

This heavy-duty electric pipe threader comes as a single complete set designed for steel plumbing jobs ranging from 1/2 inch (12.7mm) up to 2 inch (50.8mm). The machine threads, cuts, and reams water, gas, and electrical conduit pipes fast using preset alloy steel dies. A geared pump drops oil automatically while working to keep dies cool and stop friction heat during long shifts. The unit spans 635 mm (25 inches) in length, 400 mm (15.7 inches) in width, and 440 mm (17.3 inches) in height excluding stand hardware for easy transport on job sites.

✅ Accommodates pipe sizes from 1/2 inch (12.7mm) to 2 inch (50.8mm) with two ready-to-use die kits for standard threads.
✅ Hardened knife inserts hit HRC58-62 Rockwell scale so edges stay sharp through heavy schedules on stainless and carbon steel.
✅ Delivers controlled rotation at 22 turns per minute matching typical workflow speeds while 750-watt motor maintains steady torque.
✅ Separate die packs handle half to three-quarter inch pipes at fourteen threads per inch plus one to two inch pipes at eleven threads per inch.
✅ Chuck opening accepts tubes up to 65 mm (2.56 inches) outside diameter with sledge travel reaching 110 mm (4.33 inches) for deep cut access.
✅ Solid frame footprint lands at 635 mm long, 400 mm wide, and 440 mm tall without mounting legs to fit tight mechanical rooms.

💡 How does an automatic lubrication setup improve cutter longevity and thread cleanup on rugged pipe work equipment?

The onboard pump drips steady oil so pros avoid overheating and swap worn knives far less often, saving cash on replacements and keeping threads clean without extra wiping around.

- Heat spikes stay down on tough alloys likeSchedule 80 pipe so feeds move smoothly and edges hold their shape longer without burning up - Clean chip washing stops metal shavings from packing up the groove which keeps thread pitch exact and cuts down on tedious post-cut deburring chores - Less drag on the drive gears lets the motor spin consistent without bogging down when hitting dense cutoff material that usually stalls weaker rigs - Gearbox noise rides quiet under eighty-five decibels so crews can run cycles all day without ear protector headaches or talking over the roar ✝️