Heavy Duty Drill Press Return Spring Quill Feed Coil Assembly 26 Inch Long Machine Replacement Parts Dual Hook Mount Hardware Garage Rig Swap Shop Staple

Drill Press Quill Return Spring Replacement Pack of 2 Units
✔️ 60Si2Mn steel, 680mm length, 35mm OD, dual hook design

This pack contains two heavy duty quill return springs designed to snap the feed handle back up after each drilling cycle. They bolt right onto standard radial arm machines and floor drills in home workshops and light industrial shops.

✅ Overall expand length measures 680 mm plus 26.8 inches from tip to tip ✅ Outer coating sits at 35 millimeters wide or roughly 1.38 inches across ✅ Flat stock width comes in at 6 mm alongside 0.24 inches in standard sizing ✅ Wire thickness registers at 0.7 mm next to 0.03 inches for solid feedback ✅ Hooks on both ends grip straight into standard drilled press frames ✅ Black oxide coating blocks air exposure while keeping rust at bay

💡 How does a quill return spring hold steady tension under heavy workshop loads?
Proper wire temper keeps the coil snapping back fast without bending out of shape.
- Dual hook anchors lock straight into frame plates so the drill bit rides true every time.
- Chemical black coating handles shop grease and humidity while staying handy near moving belts.
- Locking pins on both ends stop unexpected drops that normally wreck machining accuracy.

✝️