Dope High Current Isolated Solid State Relay Module 10 Amp SSR Board With DC 3-32V Input And DC 5-30V Output For Raspberry Pi Arduino ESP32 PLC MCU DSP Projects Including Photocoupler Isolation Up To 5000V

High-Current Isolated SSR Module for 10A DC loads, 1 pc pack
✔️ 10A continuous on-state, 20A peak, 8mΩ, 5-30V DC output 3-32V input

This compact solid state relay module provides isolated control of DC power, ideal for microcontroller projects and automation. Use it to drive 5-30V DC loads from Arduino, Raspberry Pi, ESP32, or PLC GPIO signals with safe photocoupler isolation up to 5000V.

✅ Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 5000V.
✅ Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V, LED indication for relay turn-on.
✅ Output voltage range: DC 5 to 30V. Maximum on-state average current 10 Amp. Maximum on-state current 20 Amp (< 2 second). Non repetitive surge peak on-state current: 160 Amp (<400uS). Maximum on-state resistance 8 milliohms(0.008 ohm).
✅ This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the 5 to 30V high current DC power.
✅ Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw.

💡 What is a handy question about a high-current isolated SSR module for microcontroller projects? This handy answer covers core considerations.
- Wiring: connect 3-32V input to switch 5-30V DC loads safely
- Isolation: 5000V photocoupler isolation protects controllers and reduces ground loops
- Use cases: ideal for Arduino, Raspberry Pi, ESP32, PLC projects needing solid state switching