Copper Electric Solenoid Valve, Normally Closed, For Water, Air, And Gas Systems, 110V AC, Quarter Inch NPT Thread, Cast Copper Coil, Compact 74mm By 39mm Body, 2.5mm Orifice, Built To Last Workhorse For Home And Industrial Use

Copper 110V NC Solenoid Valve for Water and Air
✔️ NC, 110V AC, 1/4 in NPT, 2.5 mm bore, copper coil, single unit

This compact copper solenoid valve is built to handle water, air, and some gases in home plumbing and light industrial lines. It uses a normally closed design for safety when power is off.

✅ Copper body and copper coil for durability
✅ Size: 74mm x 39mm (2.91" x 1.54"), 12mm thread, 1/4" NPT interface
✅ 2.5mm bore for controlled flow
✅ Normally closed design for safety
✅ Temperature -5 to 80 C; pressure 0-7 kgf/cm2
✅ Power adaptor required at least 1.2 A
✅ Pack: 1 piece

💡 What is a solenoid valve used for in fluid control systems?

Solenoid valves are handy for automating flow control in water, air, and certain gases.

• They open when energized and close when power is removed, providing precise shutoff.
• Normal-closed configuration keeps the line sealed when the system is off for safety.
• They are well suited to low to moderate pressures and temps found in residential and light industrial setups.
• For best results, observe duty cycle to avoid overheating when held on for long periods.