Built Tough Square Punch And Die Set For Mild Steel Measuring 45.5Mm X 45.5Mm One Sixteenth Din Setup Flips Through Up To Three Mm Plate Without A Sweat Includes Draw Bolt Bridge Tct Pre Drill Saw And Rugged Carry Case

Precision Square Punch And Die Set For Mild Steel
✔️ Cuts 3mm mild steel plates using precise crosshair alignment

Standard square punch and die tools help metalworkers tap out mounting holes evenly across flat sheets without waiting for big shop presses. You will typically run this rig on automotive frames, machine guards, or shelving brackets where speed and repeatability matter. The whole setup slots straight onto common bench-mounted punch heads to keep your workflow tidy and fast.

✅ 1/16 DIN standard measuring 45.5 by 45.5 millimeters
✅ Accommodates heavy gauge mild steel up to 3mm thick
✅ Equipped with four direction marks for quick layout tracing
✅ Ships with draw bolt, bridge connector, and carbide prep bit
✅ Secured inside a durable impact resistant storage box

💡 How does a DIN standard square punch die tackle tough mild steel fabrication chores?

Running a manual setup on thicker plates is actually pretty handy once you know how the mechanics click.

- The dual-axis crossmark guides line the cutter edges right up for zero guesswork during layout.

- Tungsten carbide pilot bits lock the sheet metal down tight while you push past the yield point.

- Slide-and-lock bridge clamps route all torque straight to the foundation so you dont strip bolts.

Just mount it on your bench rig and finish up those rack mounts before lunch rolls around.

✝️