22 Liter Sublimation Oven For Crafting Mugs Tumblers Water Bottles With 110 Volt 1500 Watt Convection Heating Includes Heat Resistant Tape Silicone Glove Plus Shrink Wrap A Solid Setup For Hustling Creators
✔️ 22L chamber, 1500W element, 140-390°F heat, handheld friendly build
This handy 22 liter sublimation oven is a solid workbench pick for customizing ceramic mugs, stainless tumblers, and plastic vessels. Built for small batch production and weekend craft hustles, the unit wraps baked goods and gear inside a sealed zone that pushes hot air through all sides at once. You just tape down your printed sheet, hit start, and walk away while the heating coils do the heavy lifting.
✅ Chamber volume measures 22 L (0.78 cu ft) with plenty of clearance for stacked blanks ✅ Outer shell spans 18.4 x 12.7 x 12.6 inches (467 x 323 x 320 mm) for desk fitting ✅ Internal wiring plugs into standard 110 V outlets and draws a clean 1500 W load ✅ Thermostat dials cover 140 to 390℉ (60 to 200℃) to match different coating types ✅ Cycle button tracks 1 to 60 minutes so you never overcook your transfers ✅ Platform weight rests at 4.9 kg (10.8 lbs) for quick repositioning on tables💡 Which thermal settings optimize adhesion across coated metal and ceramic vessels?
The optimal cure rates hinge directly on the coating density and wall thickness of each blank you handle.
- Hard-alum tumblers need intense early bursts near 375℉ (190℃) to push vapor seals tight against curved edges
- Unglazed pottery blanks absorb humidity fast, so backing off the thermostat keeps walls intact during the 30 minute mark
- Stainless drinkware locks best when you hold steady 200℃ (392℉) warmth to fuse pigments without scorching the finish
- Untouched plastic gear responds well to gentle rises that spread dyes evenly across smooth zones before the hour closes ✝️