12.5mm Capsule Slip Ring, 300 RPM, 6 Wires, Circuits X2A, For Monitor And Robotic Test Equipment, High Reliability Gold Contact Rotary Connector, Suitable For Continuous Rotation, 1 Pc

12.5mm Capsule Slip Ring with Gold Contacts, 6 Wires
✔️ 1 Pc pack, 6 circuits, 240 VAC/DC, 0-300 RPM rating

The Capsule slip ring is a standard off-the-shelf unit with gold-plated contacts that ensure stable, long life at the rotary interface. It is designed to carry both power and signals through 360-degree rotation. Typical uses include CCTV monitoring systems, electrical test equipment, medical devices, and robotics where a compact, reliable rotating connector is needed.

✅ Voltage: 240 VAC/DC
✅ Current: 2A per circuit
✅ Speed: 0-300 RPM
✅ Circuits: 6
✅ Outside dia: 12.5mm (0.49")
✅ Flange dia.: 24mm (0.94")
✅ Length: 15mm (0.59")
✅ Housing: Engineering plastics
✅ Contact: Gold plated ring and brushes
✅ Dielectric strength: ≥500 VAC @ 50Hz
✅ Insulation resistance: 1000 MΩ @ 500 VDC
✅ Lead size: 225mm 30# AWG Teflon wire
✅ Operating temp: -40℃ to +80℃
✅ Humidity: 60% RH or higher

💡 What is a capsule slip ring used for in rotating equipment?

It enables power and signal transfer through a rotating joint in compact systems. - Allows continuous rotation for CCTV, robotics, and test equipment - Carries power and data lines through a single compact unit - Gold-plated contacts reduce electrical noise and wear - Commonly used in monitoring systems and medical devices✝️