Nachi

7216CYP4 Nachi Angular Contact Bearing 80x140x26 Abec-7 Japan Bearings

No reviews
$858.99
SKU: Kit10862
UPC: 00193019091609
Item: 7216CYP4 Nachi Ball Bearing
Type: Nachi Angular Ball Bearing
Cage: Polyamide resin cage
Quality: ABEC-7 (P4 quality)
Dimensions: 80mm x 140mm x 26mm/Metric
High Precision Ball Bearing
7216CYP4 Nachi Angular Ball Bearings
15 degrees Contact Angle
ABEC-7
80mm x 140mm x 26mm
Made in Japan


7216CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan.

  • Item: 7216CYP4 Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 80mm x 140mm x 26mm/Metric
  • ID (inner diameter)/Bore: 80mm
  • OD (outer diameter): 140mm
  • Width/Height/thickness: 26mm
  • Size: 80 x 140 x 26 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 93,500 N
  • Static load rating Cor: 78,000 N
  • Limiting Speed:
    • Grease Lubrication: 7,300 RPM
    • Oil Lubrication: 10,000 RPM
  • Made in Japan


Dimensions
d D B r r1 a
80mm 140mm 26mm 2mm 1mm -0.3mm

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.