Nachi

6001 Nachi Bearing Open C3 Japan 12x28x8

$7.88
SKU: Kit14507
Item: 6001 Nachi Ball Bearing
Type: Nachi Deep groove Ball Bearing
Closure: Open
Radial Clearance: C3
Dimensions: 12mm x 28mm x 8mm/Metric
6001 Nachi Bearing
12mm x 28mm x 8mm
Made in Japan


6001 Nachi Bearing, Made in Japan, the 6001 inner diameter is 12mm, the 6001 outer diameter is 28mm, the 6001 width is 8mm.

  • Item: 6001 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Closure: Open
  • Radial Clearance: C3
  • Dimensions: 12mm x 28mm x 8mm/Metric
  • ID (inner diameter)/Bore: 12mm
  • OD (outer diameter): 28mm
  • Width/Height/thickness: 8mm
  • Size: 12 x 28 x 8 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 5,100 N
  • Static load rating Cor: 2,390 N
  • Limiting Speed:
    • Grease Lubrication: 28,000 RPM
    • Oil Lubrication: 32,000 RPM
  • Made in Japan

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

Customer Reviews

Based on 2 reviews Write a review